Ports & Terminals

London Gateway truck queues reach A13 after terminal systems issue

A London Gateway systems issue backed HGVs toward the A13 on 19 November. Terminal operations later stabilised, while c2c reported rail disruption and ASDA Tilbury lost power.

HGVs clog up port routes, c2c disrupted - and ASDA's shut because of a power outage - Thurrock Nub News
Exhibit · HGVs clog up port routes, c2c disrupted - and ASDA's shut because of a power outage - Thurrock Nub News — csr_ch / pixabay

Adjustments

  1. DP World London Gateway had four container vessels berthed on 19 November 2026.
  2. A systems issue caused temporary congestion, with truck queues reaching the A13 Manorway roundabout.
  3. At 11:45am, the terminal said its Terminal Operating System was stable but a truck backlog remained.
  4. c2c reported eastbound and westbound delays and cancellations between Pitsea and Southend.
  5. ASDA Tilbury closed after a power outage; Thurrock Council's port alert appeared to mix up local ports.

By Tom Whitfield

Four container vessels were berthed at DP World London Gateway on Thursday, 19 November 2026. Heavy goods vehicle (HGV) queues reached the A13 Manorway roundabout during a terminal systems issue.

DP World London Gateway lies in the east of Thurrock. Access problems on the quayside backed up lorries entering the port. Traffic also stacked on link roads in neighbouring Stanford-le-Hope and Corringham.

London Gateway said: “A systems issue at London Gateway this morning caused temporary congestion around the port. The issue has now been resolved, with terminal operations returning to normal and traffic congestion easing.”

The statement marked two recoveries. Terminal operations had returned to normal, and congestion around the port was easing. It did not say the truck queue had cleared. That distinction matters for trucks booked on deliveries or collections.

What did the disruption affect at London Gateway?

Road access was the immediate operating issue. The four-vessel berth presence was reported. No sailing delay or vessel turnaround impact was linked to the congestion. The source gave no affected truck or cargo figure.

For shipping teams, the available evidence separates a berth count from a landside flow problem. The account listed four container vessels alongside and a road queue reaching the A13. It did not identify delayed calls, stopped cargo work or a port closure.

When did terminal operations return to normal?

At 11:45am, London Gateway issued a further update on the Terminal Operating System (the system used to run terminal activity): “Terminal operations are working as expected with the Terminal Operating System remaining stable. We continue to work through the backlog of trucks waiting for deliveries/collections.”

By then, the terminal described operations as expected. A backlog remained for trucks collecting or receiving deliveries. Terminal stability and road clearance were separate recovery stages. The update gave no queue length or expected clearance time.

Was Tilbury affected?

Thurrock Council appeared to mix up its local ports when issuing an alert, according to the report. The alert itself was not reproduced. Video reviewed by the reporter showed Tilbury running freely, with no comparable queue visible. London Gateway remained the terminal associated with the A13 congestion and systems issue.

That apparent mix-up concerned where the disruption was located. The report identified no operational failure at Tilbury. The local video instead showed normal movement there while London Gateway dealt with the truck backlog.

What happened to c2c services?

c2c warned of delays and cancellations in both eastbound and westbound services because of problems between Pitsea and Southend. The report treated the rail disruption separately from the London Gateway systems issue. It supplied no affected-service count.

Passengers faced disruption on the local rail route at the same time as freight traffic encountered road congestion. The two events shared a morning and geography. The report established no operational connection between them.

Why was ASDA Tilbury closed?

ASDA Tilbury was closed and in darkness on the morning of 19 November because of a power outage. The report gave no outage start time, restoration time or information about payment systems. Its broader description was a black Thursday for local businesses, with Black Friday approaching.

The shop closure added a third local disruption to the same morning. The source linked it only to power loss. It did not connect the outage with the port, rail or council alert.

What should shipping teams separate from the disruption?

Three operating markers emerge from the 19 November account. Four container vessels were berthed. The Terminal Operating System was stable by 11:45. Road traffic was still clearing. Only the first two were vessel or terminal facts. The A13 queue remained a separate landside recovery issue.

The report described temporary congestion around a working port. It did not identify delayed sailings, cancelled calls, lost cargo or a closure of London Gateway. That leaves a narrow but clear conclusion: the terminal recovered before the surrounding road queue had cleared, while c2c and ASDA dealt with separate faults across the borough.

via Google News: Ports & Terminals (Source)

Share this article:

More from Tom Whitfield

Tom Whitfield

Show full bio

Staff writer covering companies, deals and strategy in commercial shipping for industry professionals at Vessels.

93 articles

Linked entries

  1. World Bank: terminals at 72.2% utilisation, already past congestion line
  2. Gateway Distriparks Wins 8-Year JNPA Rail Yard Contract
  3. Durban truckers stranded as 14-20 day waits hit Gateway Terminal
  4. Port congestion is the new normal, MSC chief Toft says
  5. Shanghai–New York Container Rates Top $10,000, More Than Double May Levels

▲ Previous article