Fleet & Shipbuilding

Jiangnan Delivers 93,000-cbm VLAC Nurai to AW Shipping

Jiangnan delivers the 93,000-cbm VLAC Nurai to AW Shipping, second of four ammonia carriers after Ivy Cove went to EPS and chartered to Trafigura.

VESSEL REVIEW | Nurai & Ivy Cove – New 93,000-cbm ammonia carriers for AW Shipping and EPS - Baird Maritime
Exhibit · VESSEL REVIEW | Nurai & Ivy Cove – New 93,000-cbm ammonia carriers for AW Shipping and EPS - Baird Maritime — papazachariasa / pixabay

Adjustments

  1. Jiangnan delivered the 93,000-cbm VLAC Nurai to AW Shipping, second of a four-ship series
  2. Lead ship Ivy Cove went to EPS on June 10 and entered a Trafigura charter
  3. AW Shipping ordered two VLACs in July 2024 for ~US$250 million and exercised options for two more on October 10, 2024
  4. LPG dual-fuel engines cut CO2 by ~20% and SOx by 99%, meeting EEDI Phase III
  5. Final two deliveries are scheduled for 2027 and 2028

Jiangnan Shipyard has handed over the 93,000-cubic-metre very large ammonia carrier Nurai to AW Shipping, the UAE joint venture between ADNOC Logistics and Services and China's Wanhua Chemical Group. The delivery is the second of four identical VLACs (very large ammonia carriers) the Abu Dhabi-linked owner has on order at the Shanghai-yard, part of a newbuilding push worth roughly US$500 million in total.

The design's lead ship, Ivy Cove, tells you where these vessels are heading. Jiangnan named and delivered her on June 10 to Eastern Pacific Shipping of Singapore, and she promptly entered a charter with Trafigura. Both ships fly the Liberian flag.

What are these ships carrying?

Both vessels derive from Jiangnan's fourth-generation very large gas carrier design. The yard developed it for long-distance ammonia transport, but the flexibility goes further: each ship can load full cargoes of propane, butane and other LPG products, and can carry two grades of liquefied gas simultaneously. Jiangnan tied that capability to the relatively small parcel sizes common in the bulk ammonia trade — one hold of cargo doesn't have to match the next.

Lloyd's Register lists each ship with an LOA of 229.165 metres, a length between perpendiculars of 225.14 metres, a moulded beam of 36.5 metres, a moulded depth of 22.5 metres and a maximum draught of 13.047 metres. Gross tonnage comes in at 55,645, net tonnage at 21,891, and deadweight at 66,615.

The class notation covers a Ship Type 2G liquefied gas carrier with independent Type A tanks. It approves the ships for:

  • anhydrous ammonia
  • all butane isomers
  • butane-propane mixtures
  • propane and propylene

Cargo limits run to a maximum specific gravity of 0.69, a maximum vapour pressure of 0.0275 MPa and a minimum cargo temperature of -52°C.

Why did the tanks need reinforcing?

Ammonia posed a double problem for the yard's engineers. Jiangnan said it reinforced the four cargo tanks because anhydrous ammonia is denser than conventional LPG and demanded greater tank strength — yet ammonia's corrosive properties restricted the yield strength of steel the builders could use.

Heavier cargo plus heavier tank structure pushed up overall weight. The yard controlled the increase through structural design and weight optimisation, to the point where all four tanks could be lifted aboard as complete units.

The hull work is in-house. The low-resistance form is designed to perform consistently in full-load and ballast conditions and with cargoes of different specific gravities, with development covering resistance and wake optimisation for a medium-to-high-speed hull with a high block coefficient (a measure of hull fullness). Jiangnan also applied its patented wave damping and seakeeping hull technology and fitted energy-saving devices ahead of and behind the propeller.

How do the ships meet emissions rules?

Each vessel runs an LPG dual-fuel main engine with a shaft generator, and space plus an interface are reserved for later conversion to ammonia propulsion. Jiangnan claims the configuration cuts CO2 emissions by about 20 per cent and SOx emissions by 99 per cent, and meets EEDI Phase III (the IMO's Energy Efficiency Design Index, third tightening step) requirements.

Machinery notation also confirms a ballast water treatment system, a selective catalytic reduction unit for NOx abatement, and low-flashpoint fuel provisions.

Where did the order come from?

AW Shipping contracted its first two VLACs in July 2024 for about US$250 million, in the same round as nine 99,000-cubic-metre very large ethane carriers. It exercised options for two more VLACs, worth another US$250 million, on October 10, 2024.

Captain Abdulkareem Al Masabi, then chairman of AW Shipping and CEO of ADNOC L&S, framed the investment at contract time: the newbuildings anticipated "future demand for lower-carbon energy sources such as ammonia, which are increasingly vital in powering the energy transition."

The remaining two ships in the series are scheduled for delivery in 2027 and 2028.

via Google News: Shipbuilding (Source)

Share this article:

More from Tom Whitfield

Tom Whitfield

Show full bio

Staff writer covering companies, deals and strategy in commercial shipping for industry professionals at Vessels.

32 articles

Linked entries

  1. Jiangnan begins 175,000 m³ LNG carrier series for Shell
  2. Lotte Fine Chemical and Höegh Autoliners target green ammonia bunkering across Korean ports
  3. Sinogas in talks with Jiangnan for two VLACs as gas orderbook nears 40% of fleet
  4. CSSC commits $221m to bulkers and ASL containership novation
  5. Owners ready to fund low-emission ships — if IMO fixes the return

▼ Next article