Ports & Terminals

Earlier berth windows could cut container-ship fuel use by 14%

An IMO-linked study models 14.16% voyage fuel savings from early berth windows, versus 4.23% from a 12-hour adjustment, before EU ETS coverage reaches 100% in 2026.

Can Container Ships Save Up To 14% Fuel If Terminals Shared Berth Times Earlier? - Marine Insight
Exhibit · Can Container Ships Save Up To 14% Fuel If Terminals Shared Berth Times Earlier? - Marine Insight — hunt-er / pixabay

Adjustments

  1. A 2022 IMO-Norway-commissioned study found average per-voyage fuel savings of 14.16%, 5.90% and 4.23% across three speed-adjustment scenarios.
  2. Ships often received berth times about two hours before pilots boarded in a 2020 Rotterdam exercise covering 26 ships.
  3. Valencia’s 2021 study counted 5,793 port calls and found anchoring in 26.6% of container-ship calls.
  4. EU ETS shipping coverage rises from 70% of 2025 emissions to 100% from 2026, with the first full handover due in 2027.
  5. IAPH and IHMA launched a port-call optimization guide at the IMO’s Facilitation Committee in March 2026.

By Tom Whitfield

Early berth windows could cut a container ship’s bunker use by 14.16% per voyage, compared with 4.23% when speed adjustment covers only the final 12 hours.

A master who receives a berth window at departure can reduce speed gradually across the passage. Another master may get the time only two hours before the pilot boards. By then, there is little scope to slow enough.

That timing gap separates a high-saving just-in-time arrival (JIT) from a ship that races to port and waits at anchor.

Why does earlier berth information save so much?

A 2022 study commissioned by the IMO-Norway GreenVoyage2050 project tested three scenarios using 2019 Automatic Identification System (AIS) data. MarineTraffic and Energy and Environmental Research Associates ran the work for the Low Carbon Global Industry Alliance, a partnership under the project.

  • Whole-voyage speed adjustment: 14.16% average fuel saving per voyage
  • Speed adjustment over the final 24 hours: 5.90%
  • Speed adjustment over the final 12 hours: 4.23%

Whole-voyage speed management produced more than three times the saving from a final-12-hour adjustment. Earlier berth information gives the master more room to optimise speed, fuel consumption and arrival time.

Under JIT, a ship adjusts speed during its passage to arrive when the berth, fairway, pilots and tugs are ready. It burns less fuel and waits less at anchor.

The IMO’s 2020 guide recommended container ships as the first candidates for JIT because they face fewer contractual barriers and often follow more predictable schedules. The IMO describes today’s port-call process as “generally not optimised today”.

When does berth information arrive too late?

A 2020 Port of Rotterdam exercise involving Maersk, MSC and the IMO examined 26 ships calling at one terminal. Ships often received their berth time only about two hours before the pilot boarded.

In UNCTAD’s 2021 Valencia case study, covering 5,793 port calls, container ships anchored in 26.6% of calls. Across all ship types, terminal unreadiness caused 48% of anchorages, while arrival on a different date caused another 33.5%.

That delay leaves less fuel-saving scope than the study’s final-12-hour case.

What blocks JIT on the contract and data sides?

Commercial terms can defeat JIT before a ship reaches port. Under a voyage charter, the master must “proceed with utmost despatch”, meaning proceed as fast as possible even when no berth is free. Slowing down may conflict with that duty.

The IMO portal suggests charter clauses on virtual arrival and cost sharing as one remedy.

Data gaps create a second barrier:

  • Inaccurate timestamps
  • Port definitions that do not align with global standards
  • Port systems that do not exchange data directly
  • Weak incentives for critical-data suppliers

The IMO portal also says those supplying critical data “need an incentive to do so”. Without an accurate berth window at the start of the passage, the master cannot plan the speed reduction needed to capture the larger saving.

What can terminals do?

Terminals can close the gap by tracking inbound vessels and updating berth plans as arrival times change. UNCTAD’s 2025 maritime review urged ports to invest in digital systems, including port community platforms, or shared digital port information systems, to cut costs and delays.

  • Ship A receives a berth window at departure and lowers speed gradually over the whole passage.
  • Ship B receives its berth time about two hours before the pilot boards and has little room to change speed.

Infyz’s terminal operating system (TOS), iTOMS, includes a vessel-tracking agent for real-time ship position and arrival information. A berth-planning agent automates berth and crane allocation based on vessel size and equipment availability. Infyz reports that iTOMS has cut vessel turnaround time by 10–15%.

Other TOS vendors and port community platforms can also share berth and arrival data. Terminals choose among them based on cargo mix, equipment and systems already in use.

Infyz, founded in 2007 and headquartered in Hyderabad, India, markets artificial intelligence (AI) and cloud-enabled software for ports, shipping and logistics operations, including digital berth planning and optimization solutions.

What changes under the EU ETS in 2026?

From 2026, a shipping company must cover 100% of covered emissions under the European Union Emissions Trading System (EU ETS), compared with 40% for 2024 and 70% for 2025. The first full handover of allowances is due in 2027.

Companies buy emission allowances and surrender them to the EU for their ships’ covered emissions.

  • The rules apply to ships of 5,000 gross tonnage (GT) and above.
  • Coverage includes all emissions on voyages within the European Economic Area (EEA) and while ships remain in its ports.
  • For voyages that start or end outside the EEA, 50% of emissions are covered.

Less fuel burnt on a covered voyage means fewer emissions to cover and fewer allowances to buy.

What could change next?

In March 2026, the International Association of Ports and Harbors and the International Harbour Masters’ Association launched a Port Call Optimization Guide at the IMO’s Facilitation Committee. The guide supports standardised electronic sharing of nautical and operational data.

Port adoption will determine whether ships receive usable berth windows early enough to capture the larger fuel saving. How many ports adopt the guide is the next development to watch.

via Google News: Ports & Terminals (Source)

Share this article:

More from Tom Whitfield

Tom Whitfield

Show full bio

Staff writer covering companies, deals and strategy in commercial shipping for industry professionals at Vessels.

32 articles

Linked entries

  1. World Bank: terminals at 72.2% utilisation, already past congestion line
  2. Aalborg terminal to join Portchain network spanning 200-plus terminals
  3. NWSA October imports rise 13.1% as terminal expansion advances
  4. Mexican container traffic rose 2.4%, sharpening the build-or-tune test
  5. Port of Blyth unveils 3-hectare plan and 1m channel deepening

▼ Next article